Readers ask: Why Do We Need Loft Legs?

Loft Leg Raised Boarding Systems Products such as Loft Legs consist of ultra-strong, recycled plastic legs that create a raised platform strong enough to walk on and support storage items. They are easy to fit, extremely lightweight, allow for pipes and cables to be present and do not create thermal bridging.

What are loft legs used for?

Loft Legs raise your loft boarding above your insulation to prevent squashing/compressing which compromises thermal performance and reduces effectiveness by over 50%. Our loft legs allow you to not only save money on your heating bills, but also help create a useful loft storage space.

Are loft legs worth it?

Loft legs are fine for providing a bit of storage when insulation is laid over the joists. Quicker, cheaper and much lighter than using loads of CLS or 4×2. You just need to be careful about where you join the boards to ensure support.

Why do you need to raise loft boards?

This is where moisture condenses on the underside of the boards and drips down, causing damp. To avoid this you need to raise the boards up and permit a flow of air between the insulation and the boards. Only board directly on to the joists if you know there is no risk of condensation forming in your loft).

You might be interested:  Quick Answer: What Tools Do I Need To Take Apart An Ikea Loft Bed?

Can you put loft boards on top joists?

The supports just need to be attached to ceiling joists or roof trusses, spaced around 1m apart, and then the loft boards can be installed directly onto the supports. This results in a secure raised loft floor that allows the insulation to work effectively.

Why can’t you use the loft in a new build house?

Boarding directly onto the joists or onto a timber subframe means that air doesn’ t cool fully before it hits the timbers and boarding. These then act as thermal bridges which gather interstitial condensation and damp. Over time they will start to rot and become unsafe.

How much weight can Loft Legs take?

Features. Though loft legs can support high weights up to 500kg we would recommend no more than 50kg per m² due to load bearing characteristics of a loft.

Is it OK to board over loft insulation?

Placing loft boarding over insulation is an easy process and is essential if you want both storage and for your quilt insulation to work at its optimum performance. With the correct products, such as Loft Legs, this is easy and cost effective too.

Is it safe to board my loft?

A properly boarded loft, with the boards laid over joists in good condition, will be completely secure. It will easily take the weight of boxes, packing cases and even some items of storage furniture, and will bear the weight of anyone accessing what’s stored there.

Does boarding loft add value?

It most certainly does. The more storage space your home has to offer, the more value is added to you home. Loft boarding can increase the floor space in your home by up to 50% and using a fitted loft ladder, will offer a safe and easily accessible storage space.

You might be interested:  What Is The Loft On Jason Day Driver?

Can you walk on loft joists?

Move safely in the loft For easier movement in the loft, we recommend using walk boards (also known as crawl boards) laid across the joists. If a top layer of insulation is already in place on the loft floor, roll it back to reveal the top of the joists and then lay the walk boards on them.

Can I walk on loft legs?

Loft Leg Raised Boarding Systems Products such as Loft Legs consist of ultra-strong, recycled plastic legs that create a raised platform strong enough to walk on and support storage items. They are easy to fit, extremely lightweight, allow for pipes and cables to be present and do not create thermal bridging.

Should loft boards be staggered?

Try to lay out your loft boards in a staggered pattern. This is important because you don’t want the joints in all your loft boards to meet up as this could compromise its structure. The best screws for the job include 4mm x 30mm countersunk multi-purpose screws.

How can I make my loft floor stronger?

How to Reinforce an Attic Floor with Sister Joists

  1. Clear the Joist Spaces. Pull out all insulation and any debris from all of the joist spaces so you can see the full length of each joist, including where it meets the exterior walls.
  2. Measure the Old Joists.
  3. Cut the Sister Joists.
  4. Install the Sister Joists.
  5. Install Blocking.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

FAQ: What Is The Degree Of Loft In A Six Iron?

A standard 6 iron loft is 31 degrees, although that is the same loft as many 7 irons these days. Contents1 What club is 26 degree loft?2 What club has a 24 degree loft?3 How far should I hit a 6 iron?4 What loft is a 1 iron?5 What is the loft of irons?6 What […]

What Is Difference Between Julie And Marisa Fit Loft Pants?

Julie Fit– For those of you that are a little curvier at the waist. Marisa Fit– For those of you who have hips that are proportionate to your waist. Do you have more of a straight figure? Contents1 What is the Marisa fit at Loft?2 What happened to loft Julie fit?3 What is the difference […]