Readers ask: What Loft Is Approach Wedge?
Gap or Approach Wedge (GW) or (AW) Slightly more lofted than the pitching wedge, and filling the ‘Gap’ between the pitching wedge and sand wedge with a loft of between 50-55 degree.
Contents
- 1 Is an approach wedge the same as a gap wedge?
- 2 What degree is a TaylorMade approach wedge?
- 3 What is an approach wedge for?
- 4 Is approach wedge necessary?
- 5 What is 52 degree wedge used for?
- 6 How far should you hit a 60 degree wedge?
- 7 What degree wedge is best for chipping?
- 8 What has more loft 56 or 60?
- 9 How far should I hit a 52 degree wedge?
Is an approach wedge the same as a gap wedge?
Some manufacturers choose to call them gap wedges while others call them approach wedges. Essentially, they are the same thing. It might be easier for many golfers to simply call the wedge by the loft degree instead of the name given to it.
What degree is a TaylorMade approach wedge?
The approach wedge usually has a loft of between 50 and 52 degrees. It is absolutely imperative that you gap test your wedges and fine tune your lofts to get a nice equal distance spread, this can be done with the help of your club pro. My approach wedge is 50 degrees as my sand wedge is 54 and my pitching wedge is 46.
What is an approach wedge for?
An approach wedge is also known as a gap wedge or an A wedge, depending on the manufacturer. The purpose behind the approach wedge is to fill the yardage gap between your pitching wedge and your sand wedge.
Is approach wedge necessary?
If you need an approach wedge to fill the gap between your PW and SW —you feel you need more precision in your scoring clubs and approaches into the green—an approach wedge is a good buy. If you don’t carry a sand wedge, then add 4 to 6 degrees to your PW loft and look for approach wedges in that range.
What is 52 degree wedge used for?
The 52 degree wedge is a golf club that can be used for shorter distances on the course. It is typically used to chip or hit shots from the sand, or as an alternative to a putter if you are close enough to the hole.
How far should you hit a 60 degree wedge?
You will want to hit your 60 degree wedge between 75 and 90 yards to score well. If you are hitting it over 100 yards you are swinging too hard.
What degree wedge is best for chipping?
Most of the golfers prefer to use a wedge with 56 degrees of loft when going for chipping. Golfers go for 56 degrees loft because it offers a sufficient amount of height, the right amount of spin, and adequate maneuverability. There are a variety of wedges available with different lofts.
What has more loft 56 or 60?
A 60-degree wedge has four more degrees of loft than a 56-degree wedge. This extra loft can make a big difference when it comes to getting the ball up in the air and then stopping it on the green. Sixty-degree wedges work well for greenside bunker shots, and they tend to spin quite a bit.
How far should I hit a 52 degree wedge?
The average distance for a 52 degree wedge is between 80-115 yards for men. For women, the average distance ranges from 60-80 yards. It all depends on the skill level of the golfer and their length.